20-220 Ele. Turnout, Left(#4)

·  Point Specifications;

• Radii; 481mm (19”).

• Angle; 15°.

• Point Length; 124mm (4-7/8").

• Frog Power ON/OFF

• Power Routing Or Non-power Routing.

• Cast Metal Frog.

• 1 pc 124mm Point - Turnout.

• 1 pc Radii 481mm (19") 15º Curve.

• 1 pc Each S60 (60mm) Left & Right Cut Straight.

• 2 pcs 62mm Straight.

• 1 pc Point Power Lead 90cm (35").

• 2 pcs Custom Insulated Unijoiners.

• All Unitrack Points Come Fitted With The Point Motor Built Into The Base Of The Point.

• Unlike Other Track Systems The Point Motors Work On A 2 Wire 12 Volts DC Voltage and Needs A 24-840 Point Switch To Work Properly.

• The Point Lead-Cable Can Be Extended By Using 24-841 90cm (35") Extension Lead.

• All Unitrack Points Can Be Operated Manually, By The Sliding Switch Next To The Point Blades.

• Unitrack #4 Points Are 124mm Long & Have Track Centres Of Either 33mm, 49.5mm Or 66mm Depending On How You Set them up.

• Frog Power ON/OFF

• Power Routing Or Non-power Routing. (With The Choice Of Which Route Is To Remain Powered In Non-power Routing Mode.)

• They Also Come With A Cast Metal Frog.

• Power Routing; Is Where The Power Is Sent Down The Track That The Point Has Been Switched Too;

• E.G. A Left Hand Point Is Thrown To The Left, The Straight Section Is Now Isolated, And The Left Junction Is Now Powered.

Is Where The Power Is Sent Down Both Tracks.

• Non Power Routing;

·  Operating Modes;

·  Pack Includes;

·  Point Overview;

·  Unitrack #4 Points Have; "Selectable" Operating Modes.